In addition to Zoneplanner, Ruckus is offering a new solution based on Yagna Wi-Fi Planner, a web-based Wi-Fi network planning software. The advantage is definitely the constant updating of the software and the parameters and information of all Ruckus devices.
The product is priced very flexibly, according to the plans made per year, so if you only need to make 10 plans a year, it is also suitable for a …
Ruckus IoT software provides the ability to connect four wireless standard IoT devices to Ruckus Wi-Fi APs. The standards are BLE, Zigbee, LoRa and of course Wi-Fi.
This week we tested the compatibility between the Zabbix monitoring software and the Ruckus IoT, we recorded the data for a few days from a Zigbee 3.0 sensor.
Zabbix allows alarms and monitoring to be brought to the management of an IT department …
Wi-Fi roaming means moving from one customer's base station to another in the territory and maintaining a connection during the base station switching process. Thus, the term is slightly different in mobile communications, where the same thing is understood as handover, but it is not very critical in mobile communications, because the density of base stations is hundreds of times higher in the mobile communications network.
The history of Wi-Fi …
Here are some measurements in the 2.4GHz and 5GHz coverage area from the Saku Great Hall at Robotex 2019 competition. The following 2.4 GHz graphs clearly show that the latency (measured on a wi-fi network from an AP to a client) reaches up to 480ms and the median is 81ms, which means that in half of the cases the latency is greater than 81ms. This situation is caused by 2.4 …
In January 2020, a new Unleashed software update 200.8 was released.
In addition to the new features described here, some special features are now revealed:
The following 802.11ac Wave1 APs are no longer supported in Unleashed 200.8 and later:
• R310
• R500
• R600
• T300
• T300e
• T301n
• T301s
If there are any fore mentioned APs in the system, an alert will be issued during the …
Ruckus ICX switches support port aggregation, suitable configuration commands include:
ICX7150-24 Switch#configure terminal
ICX7150-24 Switch(config)#lag esimene dynamic id 1
ICX7150-24 Switch(config-lag-esimene)#ports ethernet 1/1/1 to 1/1/2
ICX7150-24 Switch(config-lag-esimene)#exit
ICX7150-24 Switch# write memory
show configuration:
lag esimene dynamic id 1
ports ethe 1/1/1 to 1/1/2
show interface brief:
Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name
1/1/1 Down None None None 1 No 1 0 xxx
1/1/2 Down None …
As the name suggests, VoWiFi is a solution where a mobile network call is made using a WiFi network. This means that the phone does not use a 4G / 3G / 2G(Edge) mobile network to make calls, but a WiFi connection or wireless internet. It is therefore a service that supports and in some cases replaces the mobile network.
A similar VoLTE (Voice Over LTE) solution …
The R650 is now available and Wi-Fi 6 802.11ax certified, it also includes BLE and ZigBee IOT radios (running simultaneously). The device supports IoT, WPA3, OFDMA UL / DL, etc. 512 customers can connect at the same time, which is less than the top model R750. You may ask if such a large number makes any sense at all. Yes, it does, because 512 is a very small number …
Ruckus IoT server has reached software version 1.5 (version 1.4 news), which is currently the most versatile IoT convergence environment on the market. The IoT server allows you to connect a wide variety of wireless IoT devices to your Ruckus Wi-Fi AP devices: lamps, water thermostats, temperature sensors, water meters, e-cigarette detectors and tens of thousands more. Most of these devices meet the standards (ZigBee, LoRa, BLE), they …
A number of security vulnerabilities are found on the ZoneDirector and Unleashed product lines. Collectively, these vulnerabilities allow an attacker to perform the following actions:
Ruckus Networks is releasing the fix for these vulnerabilities through a software update. Because these are CRITICAL issues, all …
