First you need to start the SNMP agent in smartzone and set the community (password).

Now you need the MIB files ja SNMP OID documentation, wich is at the end of the post. Although today the ready-made SNMP tool is mostly used, this example is made under Linux to show the structure and performance of Smartzone MIB in more detail.

Virtual SmartZone has recently received an update 5.2, which allows among other things the introduction of WPA3. We tested and it worked, here's how to configure it.

WPA3 supports Wave2 APs such as R320, R510, R610, R710 and larger, the list can be viewed here.

We had to create a new zone for testing that would only include devices that support this update:

Wireless LANs -> Create Zone…

A Captive Portal is a website that directs users who have joined the wifi network to authenticate themselves in order to access the Internet or another network.

This is a common solution, for example, at airports, cafes and hotels, where the user has to enter their e-mail address or a username and password previously shared with them to use the network.
Prior to successful authentication, access to the Internet is …

We performed a speed test on the R730 802.11ax AP and Samsung S10 using the Ruckus Speedflex App. Uplink speeds are in the 1Gbps class and downloads remain in the 400-500 Mb / s class, this difference is due to the phone's ability to handle high speeds. It is probable that such speeds have never been tested at the manufacturer.

The R730 is …

Like all Ruckus Access Points, the Ruckus ICX switch can be managed using the Virtual SmartZone platform. In this post, we'll look at how to add an ICX switch to vSmartZone and what the management platform interfaces are.

Preparations on ICX

First, the firmware of the ICX switch must be updated to 08.0.90a- To update the switch, you must first download the software from support.ruckuswireless.com, use the scp or tftp …

Ruckus Unleashed is a highly capable controller-free WiFi management platform that allows you to connect up to 50 Access Points and generate coverage for up to a thousand customers. In this post, we'll look at how to add an Unleashed network to an AP that isn't connected with a data cable, but communicates with other APs on the same network over the air, increasing network coverage to places where the …

The R610 is the second most popular Ruckus AP in Estonia and is suitable for larger companies and Wi-Fi hotspots in public spaces. It is a 3: 3x3 MIMO device with a very precise BeamFlex + controllable directional antenna solution.

In fact, there are no 3x3 MIMO client devices on the market. However, the BeamFlex + random directional antenna has a significantly better number of directional diagrams and zero position …

Creating access

First, we connect to the ICX switch through the console. We make the physical connection with a standard USB cable with a USB-C connector on the switch side, the same cable used to charge newer phones.

The first setting is to assign a management IP to the switch and activate the web interface. Mgmt IP becomes 192.168.3.19, subnet /24, gateway 192.168.3.1 and we create a certificate.

ICX7150-C12 Switch>enable…

Ruckus controller-free Wi-Fi Unleashed AP is very easy to set up. The initial setup on a mobile or computer only takes a few minutes. (UNLEASHED Wi-Fi network supports 50 APs and 1000 users)

First, download the Ruckus Unleashed app from the App Store or Google Play. You can find the app here (Google Play) or here (App Store).

Many Ruckus products come with a term "Limited Lifetime Warranty". In this post, we'll talk more about what exactly it is, what are the restrictions and what the law is.

The Limited Lifetime Warranty comes with Ruckus ICX Switches, Unleashed Indoor APs, ZoneFlex Indoor APs, and ZoneDirector devices. Outdoor APs, SmartZone SZ-100 and SZ-300 are covered by a "1 Year Limited Hardware Warranty".

The Limited Lifetime Warranty (LLW) applies only …