First you need to start the SNMP agent in smartzone and set the community (password).

Now you need the MIB files ja SNMP OID documentation, wich is at the end of the post. Although today the ready-made SNMP tool is mostly used, this example is made under Linux to show the structure and performance of Smartzone MIB in more detail.

Virtual SmartZone has recently received an update 5.2, which allows among other things the introduction of WPA3. We tested and it worked, here's how to configure it.

WPA3 supports Wave2 APs such as R320, R510, R610, R710 and larger, the list can be viewed here.

We had to create a new zone for testing that would only include devices that support this update:

Wireless LANs -> Create Zone…

A Captive Portal is a website that directs users who have joined the wifi network to authenticate themselves in order to access the Internet or another network.

This is a common solution, for example, at airports, cafes and hotels, where the user has to enter their e-mail address or a username and password previously shared with them to use the network.
Prior to successful authentication, access to the Internet is …

We performed a speed test on the R730 802.11ax AP and Samsung S10 using the Ruckus Speedflex App. Uplink speeds are in the 1Gbps class and downloads remain in the 400-500 Mb / s class, this difference is due to the phone's ability to handle high speeds. It is probable that such speeds have never been tested at the manufacturer.

The R730 is …

Robotex 2019 has started with the support of Ruckus Networks Wi-Fi solution, this time the coverage area has been built in Saku Suurhall, where we use Ruckus R720 and R610 high performance APs.

The system is managed using Ruckus Smartzone Hightscale and the Zabbix SZ SNMP extension has been added for monitoring.

Ruckus and 3K Group have supported the event from the very beginning, it is also an opportunity for …

Like all Ruckus Access Points, the Ruckus ICX switch can be managed using the Virtual SmartZone platform. In this post, we'll look at how to add an ICX switch to vSmartZone and what the management platform interfaces are.

Preparations on ICX

First, the firmware of the ICX switch must be updated to 08.0.90a- To update the switch, you must first download the software from support.ruckuswireless.com, use the scp or tftp …

Ruckus Unleashed is a highly capable controller-free WiFi management platform that allows you to connect up to 50 Access Points and generate coverage for up to a thousand customers. In this post, we'll look at how to add an Unleashed network to an AP that isn't connected with a data cable, but communicates with other APs on the same network over the air, increasing network coverage to places where the …

Ruckcast started on February 2020.

The Ruckus products education team brings you interesting topics with a wide range of guests to sit down and discuss all things that make up the product portfolio. We'll discuss topics including products from our portfolio, WiFi, routing and switching and more! We can't wait to share with you what our teams are up to.

Lengths are about 30-70min, here are the topics so far:…

Praegune versioon IOT serverist on 1.8, see lisab oluliselt jägitavust ja analüütikat, ning parandab LoRa integreerimise võimalusi.

Connecting short-range ZigBee BLE LoRa devices over a large area has always been a headache, as so many different versions and protocols of the standard do not allow for efficient management and a reliable solution. The security of IoT devices has also been a headache.

The Ruckus IOT Suite allows you to connect …

The R610 is the second most popular Ruckus AP in Estonia and is suitable for larger companies and Wi-Fi hotspots in public spaces. It is a 3: 3x3 MIMO device with a very precise BeamFlex + controllable directional antenna solution.

In fact, there are no 3x3 MIMO client devices on the market. However, the BeamFlex + random directional antenna has a significantly better number of directional diagrams and zero position …