This feature allows to save PoE budget and use more devices on the same Ruckus PoE switch.

Dynamic Power Allocation is supported on ICX 7550, 7650, 8100, and 8200 series switches.

ICX8200-C08PF Router(config)#inline power allocation dynamic

Required Software Version

Switches must run software version 10.0 or higher to enable dynamic power allocation features. You can still tune the final results with inline power e 1/1/3 priority 1, this priority cancels …

Ruckus’ newest outdoor AP has 12.8 dBi (narrow) and 11.3 dBi (wide) fixed sector antennas, selectable through software configuration. These APs are intended for large venues where the beam can be adjusted according to the needs of the event. The AP does not support the BeamFlex smart antenna system, but it does include Wi-Fi 7 with MLO and high-power transmission: 5 GHz 28 dBm (4x4 MIMO) and 6 GHz 35 …

Go to System-File and choise HTTP Upload Operation Code and ipload file, do not ovewrite runtime.bix, chose antoher filename and change later the startup code to the new one

The next slide shows how to change startup config and firmware image files, in the following image there is no alternative firmware yet present.

Just apply and restart the switch…

What are the major practical differences between these standards?

The Wi-Fi 6 (802.11ax) 2.4/5 GHz standard introduces OFDMA modulation and data multiplexing, which means that multiple clients can communicate over the air at the same time. This is a very important aspect, because in Wi-Fi each packet transmission (from AP or client) usually has to wait for the air to be free (due to the mandatory CSMA/CA algorithm). This takes …

Ruckus has released a new software called Unleashed 200.13, which is a controller and management software that works on Ruckus' regular Wi-Fi access points. Today's APs are already so fast that the R750 can now fully replace the ZoneDirector controller. As a result, the system can support up to 128 APs and up to 4000 Wi-Fi clients connected at the same time.

Dedicated controller AP is a new concept in …

Ruckus Smartzone 6.1.1 has already received a new user interface for version 6.0, which systematizes the features accumulated over the years into a clearer selection, providing search and placing bookmarks on the desktop. Different menus can also be searched now.

The best update from 6.0 is also Linkedin, Google, Facebook, Microsoft social media-based login, now you don't need a separate server for that.

The biggest update is here !!! 6.1.1 …

Ruckuse switchides saab kasutada nii switchi kui ruuteri tarkvara, firmware nimetustes on alguse lühendis vahe näha SPS ja SPR vastavalt.

Ruckus ICX family has two separate firmwares, SPS for plain VLAN switch and SPR for routing with various routing protocols, like OSPF, RIP etc.

The simplest goal of a route/switch may be to divide a large network into two L2 separate networks and to create a DHCP service using a …

Other PoE+ articles in this site https://blog.3kgroup.ee:443/tag/poe/

Soetasime lisaks kahele Fluke Cable IQ testrile endale ka Fluke Networks MS-POE MicroScanner POE Cable Verifier testri , mis võimaldab 10 Gb/s juurs kuni 90W PoEh totiestandardite testimist testimist.

We have now Fluke Networks MS-POE MicroScanner POE Cable Verifier tester to provide better know-how and services to our reseller partners. The tester allows to test up to 10 Gb/s connections and PoE power …

There's a very useful function in SmartZone - you can ssh to any connected and online AP from SmartZone cli.

Example: executing one command:

Go to SmartZone cli through ssh, go to admin mode with 'ena' and give a command in following way:

remote ap-cli c8:03:f5:0E:06:c0 "get scg ip"

------ SCG Information ------ SCG Service is enabled. AP is managed by SCG. State: RUN_STATE Server List: 10.0.12.140,194.204.45.210 SSH tunnel connected…

CommScope is excited to announce the launch of our new IoT Technology Specialization, recognizing Solution Providers with expertise in selling, deploying and supporting RUCKUS IoT. This specialization can be added to your existing CommScope PartnerPRO Network level to showcase your abilities in delivering IoT solutions.

The RUCKUS IoT Technology Specialization offers benefits including a specialist badge, prioritized allocation of qualified IoT leads, proposal based MDF, and visibility on the partner …